How do you tighten the serpentine belt on a 1997 Saturn?

Cars & Vehicles
Serpentine Belts
Saturn (car)

You don't. The belt tension is automatically adjusted via a spring loaded tensioner. If the serpentine belt is noisy or worn out prematurely. replace the tensioner. The belt should be inspected for cracks and other signs of wear. Replace worn out belt(s) before they break leaving you stranded.

前一个问题What does espoff mean?
下一个问题What are China's movement?

相关的问题

How do you remove serpentine belt on 2005 Chevy Cobalt?

You have to release the stress in the tensioners to remove the serpentine belt. When you put it back on there is a diagram under the hood of the car that takes you step by step.

阅读更多

Do you have a diagram of how to put the serpentine belt on the pulley?

You may get an answer if you list the vehicle & engine you are talking about. You are not going to get an answer to this question as is.

阅读更多

How do you repair the serpentine belt on a 1998 Mitsubishi Galant?

You don't repair a serpentine belt. You replace the worn or broken belt with a new one.

阅读更多

How do you change the serpentine belt on a 1994 mercury cougar xr7?

with a 1/2" rachet or breaker bar placed in the square whole on the tensioner pully, you push (from passenger side to drivers) which will release the presure on the belt. Might want to draw a "map" of how the belt goes cause it ain't obvious when its off the car.

阅读更多

How do you get the accessory drive belt or serpentine belt off of a 1989 sunbird?

To remove the accessory drive belt or the serpentine belt from the motor on a 1989 Sunbird, it is necessary to loosen the belt tensioner. Look for a pulley that has a bolt in a slot. Loosen the bolt and move the tensioner so there is a gap in the belt. Then remove the belt from each pulley.

阅读更多

How do you tighten serpentine belt on 1993 Ford F-350 7.3l diesel so my power brakes will work again creating the nescessary vacuum?

7.3l diesel does not have an adjusment for the serpentine belt it is autmatically adjusted with the belt tensioner.if the tensioner is not keeping belt tight, replace the belt and check to see that tensioner is working correctly.most times if vaccuum pump is not working the power brakes, you need...

阅读更多

How do you do you find the serpentine belt diagram for a Toyota RAV4 2001?

There should be a diagram under the hood somewhere. Normally on the fan shroud. Click the link for a diagram. If you do not see one search with the term "2001 Toyota Rav 4 belt diagram" and you will find a diagram.

阅读更多

How do you install a serpentine belt on a 99 Isuzu Rodeo?

There is a belt tensioner (spring loaded pulley that automatically keeps the belt tight) that needs to be temporarily slackened while the now loose belt is slipped off one of the accessories. Sorry, but I can't remember what tool is needed to loosen the belt tensioner. Just opening the hood and o...

阅读更多

How do you replace a serpentine belt on a 1995 Chevrolet Camero?

Replacing the serpentine belt on both V6 & V8 rear drive engine are fairly easy than front wheel drive. The belt is located just between the front of the engine and the radiator. You have plenty of clearance to work. Just need to losen the tension and the belt should come out. Putting the new...

阅读更多

How do you change a serpentine belt on a 2008 Toyota Corolla?

阅读更多

How do you change a serpentine belt on a 2001 Chrysler Town and Country?

How to Replace the Serpentine Belt in a Chrysler Town & Country Open the hood and find the belt tensioner pulley. Look at how the belt is routed around various pulleys. Use a wrench to rotate the belt tensioner pulley bolt and slide the old belt off of the tensioner pulley. Make su...

阅读更多

How do you set a clock on a 1997 Saturn LS2?

To set the clock in a 1997 Saturn SL2, push and hold in the stereo knob on the left side (volume/power) and then use the seek forward and back buttons to change the minutes and hours. You can only go in the forward direction so for daylight savings time you'll need to change the hour by 11. HTH.

阅读更多

Do you losen the altinator to change serpentine belt on a 94 Jimmy?

You'll have to loosen the alternator to get the belt off, unless you have a tensioner pulley in the sequence of the serpentine. yes it removes the tension to make it easier just did it last weekend.

阅读更多

How do you replace the serpentine belt on a 1997 grand prix and there is apparently two designs of the 3.8 V6. so how do you know which design your motor is so that you order the right drivebelt?

The 3.8 could be factory supercharged or not. If it was supercharged it would be obvious. I don't know anything about two designs, i know there is a 3.1 and a 3.8 liter v6. in my 97,3.8 v6 there is a tension pulley, this pulley only puts tension on the belt so it stays on. use a big wrench to pul...

阅读更多

How do you reroute serpentine belt to bypass ac compressor on 1995 town car?

If that model was available without a/c, you will need to purchase the belt for a 95 town car w/out ac, and follow the appropriate belt routing diagram for that model.

阅读更多

How do you tighten an aerial on a Nissan Qashqai?

Jennifer,I was thinking the same thing wihnisg I could like the posts and comments on this blog. It gives me hope to read this when I feel like we are bombarded with so much bigotry and close-mindedness. There are more empathetic people out there than we realize.Libby

阅读更多

Can you put a serpentine belt on backwards?

you actually can put a belt on backwards. grooves go to grooves, and smooth goes to smooth. but you have to pay close attention to the belt routing diagram. if the belt is put on the wrong way it can spin the water pump reversed causing an overheat condition very fast after starting.

阅读更多

What happens when the serpentine belt breaks on a car?

when serpentine belt breaks alternator and water pump stop working along with power steering pump

阅读更多

Why cant you detension the serpentine belt tentioner the bolt keeps rotating and not letting you get the belt on?

because the bolt is striped or you pulley is no bad take it off and get another one

阅读更多

How do you tighten a boat throttle?

阅读更多

When do you changee the timing belt on a 1997 4 cylinder petrol rodeo?

Change it every 60,000 miles. Warning: The 4 cylinder engine is an interference engine and as such if the belt breaks serious engine damage will occur.

阅读更多

How do you tighten the chain on a 2007 Raptor 700?

first, loosen the 4 screws at the bottom by the chain second, take a screw driver, or a thin rod, and insert it into 1 of the two holes on the left side of the sprocket in the rear barron third, push forward to loosen the chain and pull forward to tighten it. Lastly, tighten back the four screws....

阅读更多

How do you loosen the belt on the air conditioner?

Only older V-belts can be loosened. First loosen the lock bolt. Now, turn the tensioner bolt counter clockwise. When proper tension has been reach, re-tighten the lock bolt. On newer cars with an automatic tensioner, the tension will be correct unless the spring in the tensioner is broken. That w...

阅读更多

How do you change 1997 Mazda b2300 timing belt?

best way is to take it to a mechanic because you need a timing tool or your truck wont hit all cylinders and a crank shaft sensor toll or else the timing pully will rip off the crank shaft...a good mechanic will charge you 200 for the whole deal

阅读更多

Is the serpentine belt the same as the timing belt?

A serpentine belt does more work than a timing belt. Timing belts synchronize the movement of the crankshaft and the camshaft while the serpentine belt transmits mechanical power which drives the air conditioner, water pump, alternator, etc. To replace a serpentine belt is easy because it is outs...

阅读更多

How do you change a belt on a buell firebolt?

Remove the rear wheel and belt covers. Remove old belt. Check numbers on new and old to be sure of fit. thread new belt through front pulleys and over rear wheel pulley. Get rear axle ready and depress belt tension-er while somebody slides in axle bolt and secures. Release tension-er and reinstal...

阅读更多

How often is the serpentine belt on the 2002 Lexus gs300 changed?

Only as needed. The serpentine belts hold up well unless there is a problem with the belt tensioner or any of the driven accessories.

阅读更多

How do you reset the computer on a 2003 Saturn L200?

You reset the computer with an OBD2 scan tool. Or some times if it is not a hard code by that i mean a real problem you can disconect the batt. for a hour this some times work but the newer cars are harder and harder to do this with

阅读更多

How do you check the trans fluid on a 2008 Saturn aura?

its a seeled tranny you can check it and you cant you can check it because theres a plug on the side of the tranny you take that out and you can check it that way if its dripping out then its fullyou cant check it because theres no dipstick

阅读更多

How do you reset the security on a 2003 Saturn Vue?

Turn ON the ignition, with the engine OFF. Attempt to start the engine, then release the key to ON, vehicle will not start. Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF. Turn OFF the ignition, and wait 5 seconds.

阅读更多

How do you reset the tire pressure light on a 2009 Saturn Vue?

阅读更多

How do you reset the check engine light on a Saturn Vue?

阅读更多

How would you tighten a loose fuse on a car?

It depends... If the fuse is loose because some foreign object (like a multimeter probe) had been jammed into the socket you might be able to pry the socket closed with a jewlers screwdriver and restore the grip. If that doesn't work, you could insert a thin shim. I have seen this problem when th...

阅读更多

How do you reset the check engine light on a 2004 Saturn Vue?

阅读更多

How do you turn off the change oil light on a Saturn Vue?

Oil service reset Saturn Vue. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the Change Engine Oil light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off.

阅读更多

How do you reset the oil life on a 2008 Saturn Outlook?

Turn the ignition key to position “ON” without starting the engine. Press the vehicle information button (square) until OIL LIFE REMAINING displays. Press and hold the set/reset button (arrow) until 100% is displayed. Turn the ignition off and then start the engine to verify the indicator has bee...

阅读更多

How do you know if your serpentine belt is going bad?

Symptoms of a Bad or Failing Serpentine/Drive Belt Squealing noise from the front of the vehicle. If you notice a squealing noise coming from the front of your vehicle, it could be from the serpentine belt. Power steering and AC not working. If the serpentine belt completely fails and brea...

阅读更多

How much does it cost to replace a serpentine belt?

Typical costs: Hiring a mechanic to replace a serpentine belt typically costs about $60-$200 or more. This includes $25-$75 for the belt plus half an hour to an hour of labor, at $75-$120 per hour. The job could even take longer on some vehicles, if the belt is difficult to access or install quic...

阅读更多

How can you tell if you have a bad serpentine belt?

Symptoms of a Bad or Failing Serpentine/Drive Belt Squealing noise from the front of the vehicle. If you notice a squealing noise coming from the front of your vehicle, it could be from the serpentine belt. Power steering and AC not working. If the serpentine belt completely fails and brea...

阅读更多

How do you change the water pump on a 93 trooper DOHC and the timing belt?

if you don't know how ,you should first get a repair manual. read threw the part on the timing belt/water-pump removal and replacement. read very carefully i believe this is an interference motor which means if you don't replace the timing belt correctly you will bend valves. very very expensive....

阅读更多

How do you tighten a chain on 2004 Yamaha raptor 660?

Owners manual, or go to related link below

阅读更多

How do you change a fan belt on chevys10?

Depending on the year it should have a single belt doing it all. Check to see if there is a belt routing diagram under the hood, if not you can draw up your own easy enough. There is a spring tensioner in this type system which make it a fairly easy job. pull and hold the tensioner back while rem...

阅读更多

How do I tighten the throttle on my motorcycle?

阅读更多

Can you drive a car with a bad serpentine belt?

This is all because many cars have one serpentine belt that drives the water pump, the power steering pump, the alternator and the air conditioning compressor, and the fan. Some cars have an electric fan. It is best to not drive a car with a broken belt, even for a short distance.

阅读更多

How long can a car drive without a serpentine belt?

Not very long if it powers the water pump, -possibly 5-7 minutes before you overheat.

阅读更多

How do you tighten a chain on a tt-r 125?

loosen the rear axle and move the tire back

阅读更多

How much does it cost to replace the serpentine belt?

Typical costs: Hiring a mechanic to replace a serpentine belt typically costs about $60-$200 or more. This includes $25-$75 for the belt plus half an hour to an hour of labor, at $75-$120 per hour. The job could even take longer on some vehicles, if the belt is difficult to access or install quic...

阅读更多

Can a serpentine belt be put on wrong?

REPLACING A SERPENTINE BELT. In some instances it may be possible to install a serpentine belt the wrong way. If this happens, one or more pulleys will rotate in the WRONG direction, affecting the operation of the alternator, water pump, A/C compressor or power steering pump. This can cause major...

阅读更多

How do you change the belt on the 2 fans in front of the engine on a Mercedes E320?

to start with the fans on this auto. are not powerd by a belt, they run on electricity, so if your fans are not working, i suggest you get a manual and find out where the relays are....

阅读更多

How do you install a shifter cable on 1997 blazer?

The 1997 Chevy Blazer shifter cable will have swivel nuts on each end of the cable. Connect the shifter cable and turn the swivel nuts to the right to install the shifter cable.

阅读更多

Can anyone help how do you either tighten the air bag on a Nissan Micra or to disarm it?

we can't do anything in a worst car.

阅读更多

How do you replace the ac belt on a 95 truck?

You actually expect to get an answer. Would that be a Ford, Chevy, GMC, Dodge, Toyota, Nissan, or any other of the makes of trucks out there?

阅读更多

Does the serpentine belt affect the transmission?

Effect of Serpentine Belts on Transmission. As a result, if the serpentine belt is worn out or breaks, it results in engine overheating and losing the powered steering and charging system.

阅读更多

How do you replace the two belts on a 1999 pick up 5 something v8?

You don't list the Make, Model, which belts, or engine size, and expect an answer. The only answer I can provide with the information you provided, is, take it to a professional for this repair.

阅读更多

How do you turn off the seat belt alarm off on a 2004 f 250?

You can't. Its part of the computer. Maybe the dealer can? The work around my boss uses is plugging in a seatbelt extension which is around $25-$50 from a dealer

阅读更多

How often do you change the timing belt on a Vauxhall Astra?

Timing chain recommended changes is 10years or 100,000 miles but most do it around 70,000. A timing belt won't rattle, but does need doing early usally about 40,000-60,000 or 6 years but I'm not sure for that exact car again its wise to do early.

阅读更多

How do you clean fuel injectors on a 1997 s10?

To clean fuel injectors on a 1997 S10, first disconnect fuel pump from fuel injectors. Disconnect pressure regulator and connect the cleaning kit to the fuel port.

阅读更多

Where is the serpentine belt tensioner on a 2.4 liter Dodge Stratus?

On my 2004, there are 2. Check the diagram on the fender well or near the radiator. It shows all the pulleys the belt goes around, including the tensioners.

阅读更多

How do you loosen the alternator belt on a Mazda Mx3?

On a Mazda MX-3 (1994) you need to tighten the adjustment bolt that is close to the fire wall. Tightening the bolt loosen the belt - loosening the bolt tightens the belt

阅读更多

How long does a Toyota serpentine belt last?

With that being said most serpentine/drive belts can last for a very long time before they need to be replaced. The lifespan of the belt will depend mostly on the type of material it's made of. Older style belts generally last about 50,000 miles, while those made from EPDM can last up to 100,000 ...

阅读更多

How do you deactivate the seat belt alarm on a 2007 PT Cruiser?

By putting on your seatbelt

阅读更多

How much does it cost to replace the timing belt on a 1997 RAV4?

Labor and timing belt only, aprox $400.

阅读更多

Can you drive without serpentine belt?

Since the serpentine belt is generally the only accessory drive belt on vehicles these days, this is what you'll lose: Engine cooling* - The serpentine belt drives the water pump. Without the water pump, there will be insufficient coolant flow to maintain engine temperature, and you will overheat...

阅读更多

How often should serpentine belt be changed?

How often does a serpentine belt need to be replaced? Serpentine belts are built to last—much longer than before because of advancements in rubber technology. Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.

阅读更多

How many miles can you get out of a serpentine belt?

With that being said most serpentine/drive belts can last for a very long time before they need to be replaced. The lifespan of the belt will depend mostly on the type of material it's made of. Older style belts generally last about 50,000 miles, while those made from EPDM can last up to 100,000 ...

阅读更多

How do you get the door panel lights back on for a 1997 aurora?

The Front and rear doors are held on by two screws on the very bottom of door panel use a 7mm socket to remove them. Inside the door handle bezel there is a round plastic piece that you can remove with a flat screwdriver and there is a screw under it. Then just lift up on the door panel to remove...

阅读更多

How do you remove the cam cover on a 1997 XL1200?

get a tire iron and yank hard

阅读更多

What is the purpose of a serpentine belt?

A serpentine belt is a single, continuous belt used to drive multiple peripheral devices in an automotive engine, such as an alternator, power steering pump, water pump, air conditioning compressor, air pump, etc.

阅读更多

Where could you find an illustration on replacing serpentine belt on '97 Buick Park Avenue?

There should be an illustration in your ownners manual. Just had mine done.. mechanic had to remove psgr side motor mount to release belt. Not a fun job.trust me this ne job you want to pay someone to do, you need to lower the engine cradle to remover the PS motor mount,you could also visithttp:/...

阅读更多

How do you find the VIN on a 1997 Yamaha banshee?

on my banshee it is on the lower shifter side frame tube near the shifter or behind. probably covered in paint. just in front of the LH footpeg on the frame

阅读更多

How do you turn off the check engine light on a 1997 eagle talon?

you can go to an autozone or similar store and have them run a diagnotic, then have them shut it off. :)

阅读更多

How do you replace the oil pressure switch on a 1997 4.3 Chevy K1500?

To gain some elbow room I would remove the distributor. That's how I do that one.

阅读更多

How do you set the clock on a 1997 Chevy Cavalier Z22?

turn off the radio, and then push set, and then use the search/scan buttons to go up in your hours and minutes. :)

阅读更多

How do you replace the dash lights on a 1997 Dodge Van 3500?

There really is no easy way to do this job. Try to reach up under the dash and feel around for the tab that houses the bulb. More often that not you are going to have to pull the dash panel off. Read a manual or check out internet forums for the procedure.

阅读更多

How do you diagnose a problem with the fuel filter on 1997 dodge Dakota?

Do a fuel flow and a fuel pressure test to determine if it is a plugged fuel filter or a faulty fuel pump. Either one will require you to replace the fuel pump module assembly.

阅读更多

How do you check the transmission fluid on a 1997 Ford Ranger?

Transmission Fluid Level Check Ford Ranger (1993-1997) Getting Started. Open the Hood. Remove Dipstick. Access point for transmission fluid. Check Level. Insert dipstick and pull it out to determine level. Add Fluid. Determine correct fluid type and add fluid. Replace Dipstick. Put the dipst...

阅读更多

Diagram for changing the serpentine belt?

As you listed no make, model, engine, or year, all I can say is look under the hood for a placard diagram. Usually there is one there.

阅读更多

What causes the serpentine belt to break?

Serpentine belt problems usually result from one of three causes: a defective belt tensioner; misalignment of a pulley; or, defective bearings in the tensioner, idler, or one of accessories driven by the belt (including the water pump). Squealing sound: Belt slipping.

阅读更多

How do you reset the oil life indicator on Saturn vue?

It Will Be 1 Of 2 Procedures: Turn the Ign. To run (do not start the engine) press the gas pedal to the floor 3 to 5 times, if that doesn't work look in the fuse box under the hood for a red button that says reset on it press it 1 time then hold down till you hear it beep 5 times.

阅读更多

Can I drive without a serpentine belt?

As you can see, driving without a serpentine belt is not an option, at least not for very long. *Some cars have an electric water pump and/or electric assist steering.

阅读更多

How do you replace alternator belt on 99 eclipse?

Begin by loosening the tensioner pulley on your 1999 Mitsubishi Eclipse. The alternator belt will become loose and can be removed. Put the new alternator belt on and tighten the tensioner pulley.

阅读更多

How do you check a timing belt?

Undo the bolts or clips and remove the cover to gain access to the belt. The first thing to do is a visual inspection of the timing belt. Look for any contaminants that could eat away at the belt or cause it to slip. Also, look for cracks in the belt.

阅读更多

How do you change serpetine belt on 300E?

It is not hard. If you have the owners manual there is a picture of the route. On the front of the engine you will see a belt tensioner. Look at the belt tensioner and look close for a square that you can put a ratchet wrench inside the square. That is how you pull the belt tensioner back so you ...

阅读更多

How do you change drive belt on 1973 beetle?

Take a screwdriver and a socket that fits the nut in the middle of the upper pulley on the alternator. Notice the notches on the back of the pulley. Turn the pulley until you have a notch at your 1 o'clock position. (Just slightly to the right of top dead center) Put your screwdriver through the ...

阅读更多

Why does your serpentine belt squeak when you turn your 1998 Dodge avenger on?

The Serpentine Belt needs to be tightend with the tensioner pulley (Idler Pulley)

阅读更多

How do you remove serpintene belt on 98 Ford truck?

The tensioner has an arm with a roller at the bottom. Find the size of the socket required to get around the nut at the center of the roller (I believe the last Ford I did this on required a 16mm socket). Turn the ratchet/breaker bar (attached to the socket) counterclockwise. The arm should turn ...

阅读更多

How do you fix seat belt on Chevy tracker?

You start by identifying what's wrong with it. Chances are, it's going to be something you'll simply replace.

阅读更多

How do you replace timing belt on seat leon 1.9tdi?

Replacing the timing belt is a very detailed task. It will include removing the engine. Timing belt replacement directions can be obtained from most auto-parts stores.

阅读更多

How do you loosen belts on 1992 Mazda 2600I?

try to push the belt tensioner in then the belt should come loose

阅读更多

How do you install a serpine belt on a isx cummin i a semi truck?

Run the top half of the belt through the fan blades, rotate the fan 180 degrees, then pull that half back through the fan blades. Go around the crankcase pulley and the camshaft pulley, go under the tensioner pulley, over the AC compressor pulley, under the idler pulley, and back over the crankca...

阅读更多

How do you change a timing belt on a Ford Focus?

unless you are a professional you dont you just have to pay because its in your engine

阅读更多

How do you fix a stuck rear center seat belt on a 2002 vw jetta?

You really shouldn't try to fix anything that could be wrong with a seat belt. It even says that in your owners manual. It's a seat belt, it is designed to protect you. If there is ever anything wrong with it, you should take it to a certified repair man.

阅读更多

How do you change a drive belt on a yard machine?

Step 1: Position the mower to change the lawn mower belt. Step 2: Check the engine temperature before replacing the lawn mower belt. Step 3: Detach the spark plug wire. Step 4: Remove the cutting deck and battery. Step 5: Loosen the transaxle pulley. Step 6: Relieve tension on the u...

阅读更多

How do you open the hood on 1997 Toyota 100 with bad cable under the hood?

I have had pretty good luck over the years with solving this without damage to the car: Get a good flashlight, get a long shaft regular screw driver, us the flashlight to find the latch mechanism looking through the front grill of the car. Once you see where the latch is, use the screw driver to ...

阅读更多

Routing new serpentine belt on 94 Plymouth Voyager?

When routing a new serpentine belt, make note of how the old belt was routed. Take a picture of the belt routing if possible. Also most cars have a sticker under the hood with the routing on it.

阅读更多

How do you change a belt on a self propelled lawn mower?

阅读更多

How do you change a transmission belt on a Troy Bilt Pony?

How to Replace the Drive Belts on a Troy-Bilt Pony Lawn Tractor Lower the deck to its lowest position. Use your tractors lever to move the mower deck to its lowest position. Remove the belt guard. Remove the belt from the pulley. Remove the rear of the deck. Remove the front of the dec...

阅读更多

How do you get the rear windows to go all the way down on a 1997 Ford Taurus?

The rear windows on the Generation 3 Ford Taurus's (1996-1999) are not able to roll down completely because of the door design. The window cannot fit into the lower door cavity. Contrary to popular belief, there is no Federal regulation or reason behind this other than the door shape and design.

阅读更多

How do you put a drive belt on a riding lawn mower?

阅读更多

How do you release the belt on 2000 model gu patrol to remove alternator?

Loosen the tensioner pulley. The tensioner pulley will slide to the right. This will loosen the alternator belt. So it can be removed.

阅读更多